Supporting local schools through the biggest health crisis of our time

John Lumb explains how Evotech Air Quality is supporting local schools through the biggest health crisis of our time.

Evotech, which specialises in building performance and maintenance has been supporting clients through recent lockdowns. During this time we began installing air quality sensors and improving the indoor air quality when required.

However, it soon became apparent that schools were having a particularly challenging time during the pandemic. We wanted to support local schools in the most polluted areas to monitor air quality so that improvements could be made to improve classroom environments and the wellbeing of pupils and teachers.

So, we teamed up with our partners Airthings and Airly to install air quality sensors and provide technical support to interpret the data and advise on the best solutions at a number of Calderdale schools which we felt had the greatest need.

Over the Summer, our specialist engineers installed Airthings indoor air quality monitoring sensors, along with an Airly outdoor air quality sensor at local schools in Calderdale and Greater Manchester.

The devices have been calibrated and our air quality team collected baseline data ready for schools re-opening. Our specialists will continue to evaluate the data and provide ongoing air quality alerts and reports, helping the schools improve their air quality to provide safer, healthier school environments. Where ongoing indoor air quality issues are identified, our specialist engineers will develop a plan for improvement.

The Department for Education recently pledged to provide 300,000 carbon dioxide monitors to state schools in England to help identify where ventilation is limited, and viruses may more easily spread.

Children in the school playground during a physical education lesson

But are carbon dioxide monitors enough?

Whilst high levels of CO2 indicates that a room needs additional ventilation, there are other pollution elements that should be addressed, and which may become regulated in the near future.

In fact, WHO recently adjusted most of its air quality guidelines downwards, slashing recommended safe limits in some cases by 75%, and warning that exceeding the new levels would pose a significant risk to health.

Also, recent research has concluded that a small increase in air pollution leads to a large increase in the Covid-19 infectivity and mortality rate in England.

Both the Airly and Airthings sensors monitor multiple air pollutants in addition to CO2, allowing building occupants to tackle other sources of pollutants that can be damaging to health, especially the lungs and long term health of children, who breathe more rapidly than adults and whose lungs are not fully developed.

In our quest for energy efficiency and a reduction in carbon emissions, we have made our buildings more airtight, preventing natural ventilation.

In short, many of our buildings simply cannot breathe!

Of course, many commercial buildings bring in fresh air through mechanical ventilation units, and now the latest state of the art systems can automatically adjust airflow to suit the specific needs of rooms and zones via building management systems when they are linked to a network of air quality monitoring sensors.

For older systems, air handling units should be set to maximise outdoor air over recirculated air. It should be noted here that, some AC units only recirculate air and do not add fresh air to the mix. If your building has this type of system you should look to upgrade or follow the guidance below.

But how do we safely improve ventilation, when the only method is the opening of windows and doors, and outdoor pollution levels are high?

In these instances, high-quality air purification and sterilisation units can remove contaminants from the air, including bacteria and viruses, making for safer indoor spaces.

They cannot, however, reduce or remove CO2, so it’s advised to open windows regularly, avoiding rush hour and the school run at both ends of the day.

The introduction of fresh air will reduce CO2 which can be detrimental to health in its own right, and the filtration units will deal with other pollutants including PM, NO2, VOCs and viruses.

Air purification units should incorporate a HEPA13 filter as a minimum, that will capture 99.9% of particulate matter down to 1µg/m³ (micrograms per cubic meter of air), and preferably also uses a high grade activated carbon filter to reduce chemical pollutants (VOCs), NO2 and other gases. Some units also use UVC light to kill 99.9% of airborne bacteria and viruses by damaging molecules in proteins, although these are mostly used in a healthcare setting.

The work we are doing with local schools is in its infancy, but already we have seen a rise in poor air quality in all the schools we are working with, as children returned to school in September and traffic increased on roads around them. Our air quality data and engineering specialists are working together to advise each school on a course of action to improve their environments.

Part of our #CleanAirSchools campaign focuses on educating children on air quality, what pollutants are in the air and where they come from.

The data collected from the sensors can also be used in helping schools encourage parents to use alternative methods of travel and support campaigning for school streets, anti-idling projects and air purifiers.

Children are our future after all, and I encourage other businesses to join forces to support the health and wellbeing of their local children. Together we can make a real difference to future generations.

Evotech Air Quality is also supporting other early years providers, schools and colleges to put in place measures to help minimise the risk of Covid-19 transmission, with discounted state of the art, air quality monitoring sensors and support services.

For more information on air pollution, solutions and our #CleanairSchools campaign visit www.evotechairquality.co.uk